DOWNLOAD CATALOG

Lifting table for upholstery ST-3
Using this pneumatic table you can significantly improve both productivity and the quality of furniture.
Lifting table with pneumatic drive. For general use in the upholstery industry, for manufacturing of upholstered furniture.
- The height of the lifting table can be adjusted during the manufacturing process;
- The table is supported with a steel frame, pneumatic cylinder, and an automatic drive;
- The automatic drive is foot-controlled at both sides of the table;
- The table has a connection (output) for pneumatic devices
- After the table is cut off from the power supply, it is automatically blocked (if the power supply is cut off, the table top will not drop);
- The table has a drawer for storing basic upholstery tools.
Specifications:
Tabletop dimansions: 900-2000 mm
Maximum lifting height: 1280 mm
Minimum height with table top dropped: 300 mm
Maximum lifting capacity: 160 kg
Working pressure: 6 bar
Lifting speed: 15 cm/s
Dropping speed: 15 cm/s
Occupied surface of the basis: 700x1850 mm
Weight: 150 kg

Table for upholstery ST-3/BR
REXEL Company is a leading manufacturer of the lifting tables for upholstery in Poland. Using this pneumatic table you can significantly improve both productivity and the quality of furniture. For general use in the upholstery industry, for upholstered furniture manufacturing.
- The height of the lifting table can be quick adjusted during the manufacturing process;
- The table is supported with a steel frame, servo-motor, and an automatic drive;
- The automatic drive is foot-controlled at both sides of the table;
- The table has a connection (output) for pneumatic devices;
- After the table is cut off from the power supply, it is automatically blocked (if the power supply is cut off, the table top will not drop);
- The table has a drawer for storage basic upholstery tools.
Accessories:
- Steel tubes for raising furniture over the table for easy access to its bottom part;
- Table top covered with 2mm thick stainless steel.
Specifications:
Tabletop dimensions: 940x1940 mm
Maximum lifting height: 1280 mm
Minimum height with table top dropped: 300 mm
Maximum lifting capacity: 130 kg
Working pressure: 6 bar
Lifting speed: 15 cm/s
Dropping speed : 15 cm/s
Occupied surface of the basis: 700x1850 mm
Weight: 150 kg

Pneumatic turntable ST-4
Our long experience in manufacturing pneumatic lifting tables and close cooperation with the Polish largest manufacturer of upholstered furniture allowed us to create the perfect table for gluing furniture.
The Pneumatic turntable ST-4 is designed for gluing, assembly, packaging furniture and its components.
The whole construction is made of a closed steel profiles ensuring proper durability and stiffness. Steel powder coating adds an elegant look of the whole construction. The work-top made of 18 mm thick coated board and covered with 2mm thick stainless steel. The work top strengthened with four stabilizers at the bearings.
Main advantages:
- Work top covered with stainless steel remains clean a long time;
- Steel cover provides a durable and reliable performance of the mechanism;
- Steel tubes on the table top provide a minimal contact of furniture with the table surface;
- Table is manufactured by Polish producer with years of experience.
Specifications:
Occupied surface of the basis 700 x 700 mm
Turntable worktop: 1200 x750 mm
Minimum height with table top dropped: 450 mm
Maximum lifting height: 820 mm
Pneumatic cylinder: D125 x 200
Air consumption a full cycle: 40 liters
Maximum lifting capacity: 160 kg
Weight: 150 kg
Tubes adjustment on the table top: 600 - 800 mm

Pneumatic table for mattresses PDM-1
Pneumatic table for mattresses is designed for furniture industry. It can be used in manufacturing of the big pieces of upholstered furniture with spring mattresses or upholstery foam. It greatly facilitates the production of such vast furniture; it provides even compression of springs or foam rubber to the desired thickness over the entire surface.
Upholstering of a cloth is carried out by its pre-stretching it on a mattress, it gives a good effect - upholstery cloth has smooth surface with no visible wrinkles.
Also, there is a significant time saving, because the whole operation can be done by one person, the press continues to hold elements of the furniture in the same position in which it was placed under the press for the upholstery and provides easy access to the entire back side of the furniture piece, without the need to rotate it.
The power supply of pneumatic press is compressed air, so you can use your existing network of the compressed air in your production shop. Using pneumatic actuator with trapezoidal screw and a hand wheel allow you to accurately adjust the desired compression force to the mattress. Pressing force is indicated on the operating pressure regulator, mounted on the body of the press.
Specifications:
Weight: approx. 225 kg
Working pressure: 0-9 bar
Manufacturer: Rexel

Pneumatic table for office chairs PDK-1
Using this press you can significantly improve efficiency, productivity and quality of your chair manufacturing department.
Long stroke of the pneumatic cylinder and lower telescopic stand allow adjusting press on necessary, comfortable height for the operator. Our press is a perfect machine for upholstering of office chair seats or backrests. The control device with two-hand sensor ensures the machine's total safety. It is possible to adjust the pressing force using air pressure regulator. The press provides controllable and even pressing of the chair seats and backrests (material, upholstery foam, chipboard), so there is no need to pull the material to ensure its right tension.
Press is equipped with turntable cushion that makes upholstery nice and easy. It allows worker to turn and staple a seat or a backrest along a contour. Equipment is manufactured in Poland
Specifications:
Occupied surface of the basis: 80x105 cm
Height: 215 cm
Weight: 110 kg
Working pressure: 3-6 bar

Pneumatic press for office chairs PDP-1
Using this press you can significantly improve efficiency, productivity and quality of your chair manufacturing department.
Long stroke of the pneumatic cylinder and lower telescopic stand allow adjusting press on necessary, comfortable height for the operator.
Our press is perfect machine for upholstering of office chair seats or backrests. The control device with two-hand sensor ensures the machine's total safety. It is possible to adjust the pressing force using air pressure regulator. The press provides controllable and even pressing of the chair seats and backrests (material, upholstery foam, chipboard), so there is no need to pull the material to ensure its right tension.
Press is equipped with turntable cushion that makes upholstery nice and easy. It allows worker to turn and staple a seat or a backrest along a contour. Equipment is manufactured in Poland.
Specifications:
Occupied surface of the basis: 60x60 cm
Height: 90 cm
Weight: 35 kg
Working pressure: 3-6 bar.

Band knife machine R1150
In order to meet the expectations of our customers, we have created an excellent and useful Band knife machine Rexel R1150 that is able to cut upholstery foam up to 500 mm thick.
Band knife machine Rexel R1150 it’s easy to use and highly productive equipment. It has high precision cutting of upholstery foam and textile materials (cotton, knitted fabrics, synthetic fabrics, insulation, etc.). Multiple layers of fabric can be cut by Rexel R1000 (thickness up to 300 mm, upholstery foam up to 500 mm).
The equipment includes:
- Control: touch-screen;
- Air blowing table top;
- Variable speed control;
- Band knife security system;
- The lamp;
- Grinding device;
- Additional option: Vacuum cleaner;
- Additional option: Depth cutting meter.
Specifications:
Cutting capacity: up to 500 mm
Arm length: 1150 mm
Band length: 5240 mm
Table size: 2200 x 1800 mm
Power supply: 400 V / 50 Hz
Wattage: 2,2 kW

Band knife machine R1000 with air blowing and variable speed control.
Band knife machine Rexel R1000 it’s easy to use and highly productive equipment. It has high precision cutting of textile materials (cotton, knitted fabrics, synthetic fabrics, insulation, etc.). Multiple layers of fabric can be cut by Rexel R1000 (thickness up to 200 mm, some insulation up to 300 mm).
The equipment includes:
- Air blowing table top;
- Variable speed control;
- Band knife security system;
- The lamp;
- Grinding device;
- Additional option: Vacuum cleaner.
Specifications:
Cutting capacity: 200 mm (maximum 300 mm )
Table size: 1800 x 1800 mm
Power supply: 400 V/ 50 Hz
Band length: 4250 mm
Arm length: 1000 mm
Wattage: 1.5 kW

Band knife machine R750 with air blowing and variable speed control.
Band knife machine Rexel R750 it’s easy to use and highly productive equipment. It has high precision cutting of textile materials (cotton, knitted fabrics, synthetic fabrics, insulation, etc.). Multiple layers of fabric can be cut by Rexel R750 (thickness up to 200 mm, some insulation up to 300 mm).
The equipment includes:
Air blowing table top;
Variable speed control;
Band knife security system;
The lamp;
Grinding device;
Additional option: Vacuum cleaner.
Specifications:
Cutting capacity: 200 mm (maximum 300 mm )
Table size: 1500 x 1500 mm
Band length: 3800 mm
Arm length: 750 mm
Power supply: 400 V/ 50
Wattage: 1.5 kW

Band knife machine R500.
Band knife machine Rexel R500 it’s easy to use and highly productive equipment. It has high precision cutting of textile materials (cotton, knitted fabrics, synthetic fabrics, insulation, etc.). Multiple layers of fabric can be cut by Rexel R500 thickness up to 300 mm.
The equipment includes:
- Mechanical band catcher;
- Lamp;
- Sharpening device;
Specifications:
Maximum cutting capacity: 300 mm
Gap between knife and body: 500 mm
Length of band knife: 2825 mm
Table dimension: 1000 x 1200 mm
Power supply: 400 V / 50 Hz
Wattage: 1,1 kW

Textile inspection machine PP-1
Textile inspection machine PP-1 is intended for checking quality, rewinding, and remeasuring of fabric. The lamp in the screen shines through the moving fabric to enable checking its for errors, mechanical damage, or contamination.
Specifications:
Length: 260 cm
Width: 85 cm
Height: 140 cm;
Max width of rewound cloth: 185 cm
Screen dimensions: 200x150 cm
Weight: 100 kg
Weight of roll: 50 kg max
Diameter of roll: 50 cm max
Re-winding speed: 60 meters per minute
Cloth leading setup: manual
Screen setup: fluent 0° - 35°.  

Textile inspection machine PP-1 Super
Textile inspection machine PP-1S is intended for checking quality, rewinding, and remeasuring fabric. The lamp in the screen shines through the moving fabric to enable checking for errors, mechanical damage, or contamination.
Specifications:
The screen: 2m x 0,5 m with neon illumination
Wattage: 0.25 - 0.37 kW
The inverter: Hitachi
Meter counter: VIGO (German)
Rewindable width: up to 185 cm
Rewindable diameter: up to 50 cm
Rewindable weight: up to 65 kg
Power: 230 V

Rewinding machine PP-2
Rexel rewinding machine is intended for measuring / rewinding fabric. This equipment is widely used in sewing factories, furniture factories, and enterprises engaged in the sale of fabrics.
Specifications:
Length: 253 cm
Width: 122 cm
Height: 106 cm
Max width of roll: up to 185 cm
Weight: 100 kg
Rewindable weight of roll: up to 45 kg
Diameter of roll: up to 45 cm
Re-winding speed: 50 meters per minute
Roll installation: Manual
РР-2 is available in 3 versions:
РР-2/А - standard, rewinding fabric, meter counter
РР-2/B - version with manual cutting, meter counter
РР-2/С - version with automatic cutting, meter counter

Spreading machine UL-3 any length
Spreading machine UL-3 is a very simple and effective system for fabric spreading in comparison with all other possible technologies.
Equipment includes:
- The cutting table construction with fluent height regulation;
- The table with aluminum edges. Width of table may be customized to client’s specifications;
- The unwinding trolley;
- The clamping line;
- The end cutter with layer counter.
The knife mounted on the cutting table is designed for cutting fabric pieces to identical lengths and stacking them one-on-another fast and easy.

Cutting table for roller blinds UK-1 MAX
Maximum cutting length: 2 500 mm
The equipment includes:
- Cutting table length 3300 mm, width 2770 mm;
- End cutter knife;
- Pneumatic clamping line;
- Material feed device.
On this table you can cut:
- Fabric for the production of roller blinds;
- Different solid, thick tissues, felt;
- All kinds of textile products: carpets, rugs, runners, mats, floor coverings.                                                                                         

Automatic measuring stop PA-1-3
An automatic measuring stop is designed for cutting any profiles made of aluminum.
This machine is equipped with a stop, which is automatically sets to the specified position after entering the required length of the cut profile of the on the touch screen. The end of the profile should be moved all the way to the stop and after that a segment can be cut. This equipment provides fast and accurate positioning.
The PA-1-3 set includes:
- An automatic linear scale, 3000 mm long, with all required control equipment and a touch screen for an operator;
- A working table, 3000 mm long;
- A table has a saw for cutting aluminum profiles.

Roller blind fabric winding unit ZT-1
We offer the perfect device for the fabric winding during the manufacturing roller blinds, indoor blinds. This device allows winding the fabric on the tube in much faster and more accurate way unlike to manual winding.
Main advantages of ZT-1
- Fast and simple installation and removal of a roller blind tube with the fabric after winding;
- Fabric winding unit can be used with a cutting table for roller blinds REXEL UK-1MAX, or with any other.
- Device is foot-controlled;
- Variable speed control;
- Suitable for most roller blind tubes;
- Intuitive machine operation.
Specifications:
- Wattage: 120 W
- Voltage: 230 V
- Tube diameter: up to 40 mm
- Tube length: up to 2650 mm
- Rolling machine length: 3000 mm

Roller blinds control lift WK-1
The equipment is designed for roller blinds testing. This control lift allows checking the levelness of slats in the blinds. Checking the blinds ensures that the fabric is properly winded on the tube and allows to make adjustments if necessary.
- Foot-controlled;
- Fast and efficient blinds inspection;
- Adjustable design for different sized blinds;
- Light and durable construction.
Specifications:
Power and wattage: 0,4 kW 3x380V/50Hz or 230V/50Hz
Dimensions: 3400x3100x500 mm
Guide maximum height: 3000 mm (4000 mm optional)
Maximum width : 2000 mm (3000 mm optional)
Slider’s speed: approx. 0,3 m/s
Weight: approx. 60 kg.

Automatic end cutter OT-1/A
The automatic end cutter OT-1/A is used in plants or wholesale outlets for cutting textile materials. It quickly and accurately cuts a segment of fabric to the required length. Therefore, it can be installed as an additional device for the cutting table, rewinding machine, or the textile inspection machine. On these machines can be installed the cutting length counter and the counter of cut sections.
Working principle:
The work cycle on the end cutter OT-1/A is automatic (While cutting, the material knife moves in the guide way independently). At client’s request, REXEL will produce an end cutter the necessary length (e.g. for a non-standard width of cutting table).

Manual end cutter OT-1/R
The manual end cutter OT-1/R is the device, which is used in plants or wholesale outlets for cutting textile materials. Its task is quick and accurate cutting required length of the of fabric piece.
Therefore, it can be installed as an additional device for the cutting table, rewinding machine, or the textile inspection machine. On these machines can be installed the cutting length counter and the counter of cut sections.
Working principle:
The work cycle on the end cutter OT-1/R is manual. At client’s request, will produce an end cutter the necessary length (e.g. for non-standard width of the cutting table).

End cutter OT-3 for solid and heavy materials
The End cutter OT-3 is intended for cutting solid and heavy materials and is widely used for cutting the material during the roller blinds, indoor blinds manufacturing. The advantage of this cutting table is that through the thick material goes just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the cut-off device on guide (1 motor performs two functions).
Specifications:
Voltage: 3-phase/380V
Wattage: 250 W
Material thickness: up to 20 cm
Material width: up to 220 cm
Knife rotation speed: 1350-1450 rpm
The knife movement speed: 0.5 m/s
The diameter of the blade: 125 mm

Cutting table SK-3
SK-3 cutting table is basic cutting room equipment in tailors’ and upholsterers’ shops. The modern and revamped construction was presented for the first time at the "INTERMASZ" fare, March 2008.
The whole construction is made of closed steel profiles ensuring proper durability and stiffness. The work-top made of 25 mm chipboard with edges covered with aluminum angles that guarantee durability. Steel powder coating adds the elegant look of the whole construction. The SK-3 cutting table consists of modules and can be quickly and easily extended at any time. You can also adjust the table height (to some extent) and level it using adjusting screws.
Specifications:
Standard width of table: 1,83 m – 2,07 m.
Height of cutting table: 90 cm.
Each following section increases the cutting table by: 1,1 m

Full catalogue and Online-Shop are available at http://www.rexel.com.pl